Espazzola cleaning tool black 2+3-58

Description

The NEW ESPAZZOLA 2+3-58
BREWING GROUPS CLEAN QUICKLY, EASILY AND SAFELY 
Many have been using the well-known Espazzola-2-58 with enthusiasm for years.

For even more machines:
The Espazzola-2-58 has two fixed cams - and therefore does not fit in all brewing groups 

With the new Espazzola-2+3-58, you decide how many cams are mounted on the cup: Clips made of stainless steel wire are clipped into specially designed spaces in the cup wall.
You can easily adapt the Espazzola to the shape of your portafilter.
The size remains the same. The new Espazzola-2+3-58 will of course continue to fit in all machines that are compatible with the familiar Espazzola-2-58.

The cam clamps of the Espazzola-2+3-58 are made of springy stainless steel wire, making them much less sensitive even when used vigorously. And if a clamp does break, it can be replaced quickly and easily.

The retaining pockets in the cup of the new Espazzola-2+3-58 are much deeper and grip the membrane better; slipping out is virtually impossible.

Optimized membrane:
The membrane of the new Espazzola-2+3-58 has been given a new shape. It now adapts even better to the shower. The new membrane also rewards you with a longer service life!

New water routing:
In the old Espazzola-2-58, the dirty water was routed into the drip tray on the outside of the guide ribs. Sometimes a splash was missed.
With the new Espazzola-2+3-58, the dirty water is collected under the cup in a funnel and drained in a controlled manner near the top of the funnel. Experience even easier and cleaner cleaning of your brew group.

For brew groups compatible with a tamper diameter of 56 58 mm and an outer diameter of the portafilter of 69 mm or more.

This applies to most professional and semi-professional machines from the following manufacturers: Astoria, Bezzera, Cimbali, Faema, ECM, Marzocco, Profitec, Rancilio, Rocket, Slayer, Wega and others.

The Espazzola-2+3-58 is a professional tool for cleaning the brew group of espresso machines. It is hooked into the brew group like a portafilter and uses the hot water from the machine to thoroughly and comprehensively remove coffee residue from all surfaces. Instead of laboriously brushing out the brew group by hand, the machine almost cleans itself.
The Espazzola consists of a rigid cup section that can be hooked into the brew group like a portafilter. A flexible insert is attached to this cup - the membrane.
The flexible membrane adapts to the brew group. All areas in this angled and hot part are wiped simultaneously - right up to the seal and into the groove for the portafilter cams!
At the same time, the hot water from the espresso machine is used to thoroughly rinse the brew group. This intelligent principle means that cleaning all surfaces in the brew group takes less than 20 seconds and is as easy as making an espresso. And without any mess or burnt fingers! The espresso machine almost cleans itself.

Clamp the Espazzola into the brew group like a portafilter.
Start the hot water extraction.
Gently move the Espazzola back and forth.
As soon as the draining water runs clear, the hot water extraction can be stopped.
Unhook the Espazzola and empty out the remaining water.
Done!

EXCEPTIONS:
Bezzera Hobby, year of manufacture up to and including 2014: Espazzola does not fit as brew group is too narrow.

Gaggia CC: Insertion into narrow brew group bell difficult at first.

Manual lever machines: Insertion into narrow brewing group bell difficult at first.

Reneka: Probably works, but needs to be tested more.

Ascaso Dream, Arc and Basic: Espazzola does not fit as the brewing group bell is too narrow. Ascaso Dream PID fits though!

Breville (also known under the brand 'Sage', all machines): Espazzola does not fit as hot water outlet is behind brew group.

Decent Espresso: Espazzola does not fit as hot water outlet is behind brew group.

GRAEF (all machines): Espazzola does not fit as the brew group bell is pulled down at the back.

Illy Francis, Francis!: Espazzola does not fit as the brew group bell is too narrow.

La Pavoni, Domus Bar and Domus Casa: Espazzola does not fit as the brew group bell is too narrow.

Lelit Anna (PL41LEM, PL41EM, PL41QE) , Anita (PL042TEMD, PL042EMI, PL042LM, PL042QE), Diana (PL60R1), Grace (PL81T): Espazzola does not fit as the brew group bell is too narrow.

Vibiemme Lollo: Espazzola does not fit as there is no space behind the brew group.

QuickMill 03035, 02820, 02835, 03004, 03035 'Pegaso', 03035 PID, 0820, 0835, 3130, 3135, 3140, 3145, 3230, 3235, 3240, 3245, 'Pippa', 03000 'Orione', 04005 'Silvano': Espazzola collides with guide pins in brew group.